Atlas Custom Works BCM Vertical Grip for Picatinny, Keymod, & M-LOK (Tan)

Atlas Custom Works Solar Power Red Dot w/ Low Mount and Killflash (Tan)

Atlas Custom Works Unit Lite Mount for T1 and T2 Optics (Tan)

ACW Picatinny Rail Mount for Flashlight Pressure Switches - Desert Tan

• Manufacturer: Ranger Armory
• Product Material: Polymer
• Compatibility: For M-LOK Rails
• Product Dimensions: 0.5 x 3.25 inches
• Color: Tan

• Made from durable polymer
• Easy to install onto M-LOK rails
• Textured pattern provides a reliable gripping surface
• Includes 4 rail covers

• Supply Voltage Range: 3.75-17 V
• Current Consumption: 24 mA
• Low Power Mode: 280 microamps
• Operating Temperature Range: min. -15C max. + 50C
• Relative Humidity: 80%

• Fine-tune trigger sensitivity effortlessly using five optical sensors with GATE Control Station App without AEG disassembly.
• Choose from various selector modes like SAFE, SEMI, BINARY, BURST, AUTO, and SEMI RAMPING tailored to your preferences.
• Set two trigger sensitivities for SEMI, BURST, or AUTO modes based on trigger pull intensity for personalized firing experiences.
• Achieve rapid trigger response with AUTO or MANUAL pre-cocking modes, simulating real replica performance for a competitive edge.
• Imitate lower-capacity magazines, enhancing realism, and set Low Ammo Warning for added immersion with advanced firmware.
• Prevent trigger jams with a set limit on BBs fired in a single series, ensuring control during rapid-fire situations.
• Simulate reload or recoil delays with adjustable intervals for tactical realism in ADVANCED and EXPERT firmware.
• Enhance combat trigger response with Smart Trigger function, optimizing ROF control for efficient initial and subsequent shots.
• Safeguard your battery against over-discharge with automatic voltage monitoring, and receive low battery warnings for optimal battery life.
• Benefit from automatic functions like burst, pre-cocking, and full cycle, ensuring efficiency and reliability across different firing modes.
• Customize vibrations for information and warnings, maintaining a stealthy approach tailored to your preferences.
• Troubleshoot AEG issues easily and stay updated with firmware updates via the GCS App for continuous improvement.
• Protect AEG components with the Smart Fuse, guarding against overheating, overloading, and short-circuiting, while enhancing ROF and trigger response with the MOSFET.
• Check module functionality quickly and ensure reliability with conformal coating, resistant to atmospheric conditions.
• Enjoy compatibility with batteries up to 14.8 V LI-PO for increased power and versatility in airsoft applications.

Maple Leaf 6.02mm Diameter AEG Inner Barrel - 310MM

• Manufacturer: Maple Leaf
• Material: Brass, Nickel plating
• Inner Diameter: 6.02mm
• Length: 310mm
• Color: Silver

• Improves accuracy and shot grouping
• 6.02mm tight bore inner barrel
• Wide variety of lengths

• Manufacturer: Maple Leaf
• FPS compatibility: 295-390 FPS
• Hardness: 60 degree
• Compatibility: Most Airsoft AEG rifles
• Material: Macaron
• Color: Yellow

• Slightly narrow entrance for better sealing to achieve more consistent power output
• Special pressure point geometry reduces inconsistency between shots for more predictable trajectory and longer distances
• The Super bucking has a narrow entrance for more accurate shooting styles.
• The new Super Macaron version features the same design aspects of the "Super" line of hopup rubbers, but now made with Macaron for improved performance.

• Brand: Maxx Model
• Construction: 6061 Aluminum
• Compatibility: For Most Tokyo Marui Spec M4/M16 Standard AEG Version 2 Gearboxes
• Color: Red

• Machined from a solid aircraft grade aluminum block with tight tolerances to provide better accuracy, consistency, and durability
• Precision rotary dial design for fine hop-up adjustments
• Re-engineered hop-up levers and nubs to work best with R-hop, flat-hop, and standard-hop to keep the BBs shooting straight and accurate on every single shot
• Accepts nozzle length from 21.00mm
• Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
• Equipped with a new CNC delrin locking C-clip that is designed to hold the barrel tight without wobbling and twisting, 3 compression springs on top, at bottom and in center of housing to ensure the hop-up unit is exactly centered, straight, and air tight
• Compatible with any 11mm inner bore AEG gearbox or HPA engine nozzle outlets
• Specially designed with BB latching system to prevent dropping BBs after removing the magazine and manual opening to release BBs from inside the hop-up chamber

• Brand: SHS
• Construction: Steel
• Gear Ratio: 13:1
• Compatibility: Fits Most Version 2 and 3 Gearboxes

• CNC machined steel
• Steel alloy build
• Hard to deform over heavy use
• Improves the workings of your gearbox
• CNC gears are stronger and lasts longer than standard AEG gears
• Allows for very strong spring combinations

• Brand: Lancer Tactical
• Construction: Polycarbonate Piston with Steel Teeth
• Compatibility: For Tokyo Marui Spec V2, V3, and other compatible Airsoft AEG Gearboxes
• Color: Black

• Durable polycarbonate construction allows for this piston to be durable while also being lightweight
• Heat treated carbon steel teeth that is more durable and reliable over polycarbonate
• Drop-in design that works with a wide variety of standard-spec gearboxes

• Brand: Gate
• Construction: CNC Aluminum
• Compatibility: All Standard V2 Gearbox, Titan V2, Standard Trigger Contacts, HPA Engines, Aster V2
• Color: Black

• Ultra-high quality trigger that is constructed from aircraft-grade aluminum and CNC'ed to perfection
• Over-travel screw located outside of the rifle body that allows for adjustment that allows for limited trigger movement to achieve faster firing rates
• Pre-travel screw that allows for fine tuning of the trigger to have a hair trigger setup
• Long-Lok system that prevents the over-travel screw from loosening up over prolong use
• Compatible with most of Gate's electronic trigger units along with HPA engines, and most version 2 gearboxes
• This product is especially dedicated to pros and skilled users *professional assembly may be required*

• Brand: Solink Motor
• Material: Metal
• Color: Red

• Brushless System
• High-Speed Super Torque
• High-Performance AEG Motor
• Upgrade your AEG to have better performance
• 140-150 Springs
• 18:1 Gears

• Brand: Solink
• Construction: Stainless Steel
• Compatibility: All Version AEG Gearboxes
• Spring Tension: M130 (420 - 500 FPS)

• Irregular pitch spring coils reduce stress, wear, and tear for your gearbox
• Made out of stainless steel giving it an increased tension and durability
• Designed for all version Airsoft AEG gearboxes

• Brand: Lancer Tactical
• Material: Steel
• Size: 8mm
• Color: Silver

• Steel Construction
• Increase Gearbox Performance
• Reduces Internal Friction

• Brand: Code 11
• Construction: Nylon Fabric
• Product Dimensions: 36 (L) x 15.5 (H) x 3 (D) inches
• Color: Black

• The rifle case is built from rugged all-weather nylon fabric and features a padded interior zipper compartment for your sidearms
• Hook and loop integrated into the bag helps secure your rifle to the main compartment
• Durable zippers that doesn't snag
• Laser cut Molle panel on the face allows for the attachment of additional pouches
• Three interior pockets allows for storage for magazines and other smaller accessories